Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
4. Operation
4.1 On/Off
A. Power switch - Press and hold the button
seconds to turn on/off the machine's power supply, After ensuring
that the machine fan rotates, place the machine on the glass and
ensure that it has been adsorbed onto the glass before releasing.
B. When placing the machine, it is
required to be at least 8cm away from
the frame.
C. At the beginning, it is required to
place the machine flat (with the body
facing up and the bottom facing down)
or on its side (with the bottom facing
the side glass), and long press"
to start the machine normally.
4.2 Starting the robot
A. Press and hold the"
seconds to enter the boot state.
B. Place the machine on the surface of the glass to be
cleaned, and briefly press the"
machine and enter the automatic cleaning mode.
4.3 Stop/Pause
When the machine is cleaning, short press the "
on the machine or the "
to stop cleaning.
4.4 Removing the machine
A. After the machine cleaning is completed and automatically
stops, press and hold the power button to turn off the machine,
and firmly grasp the handle to remove the machine
B. If you cannot reach the machine with your hands, you can use
the remote control to control the machine. After walking to a
position where your hands can reach the frame, remove the
machine.
"
" button on the surface shell for 3
" button again to start the
" button on the remote control
7
on the machine for 3
" button
Advertenties
Inhoudsopgave
