Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
OPERATION
Igniting and setting
1
4
3
Use
incorrect
correct
EN 4
1. 0 setting
2. Low setting
3. High setting
4. zone indication
Each burner can be adjusted continuously between high and low heat.
2
Burners with electric ignition:
• Press the control knob and turn it anticlockwise. The burner ignites.
• Keep the control knob fully pressed for at least 3 seconds between
high and low settings.
The thermocouple safeguard is activated.
Pans
• Ensure that the flames always remain underneath the pan. If flames
play around the pan, a great deal of energy is wasted. The handles
can also become too hot.
• Do not use pans with a base diameter smaller than 12 cm. Smaller
pans are not stable.
The recommended pan base diameters are:
• rapid burner
• standard burner
• simmer burner
• wok burner
Pan support
Put the pan supports down vertically without sliding them over the drip
tray.
Burners
Put the parts of the burner in the correct order so they fit together
properly.
1. Burner cover
2. Burner distributor
3. Thermocouple
4. Spark plug (some models)
at least 22 cm
at least 18 cm
at least 14 cm
at least 24 cm
Advertenties
Inhoudsopgave
