Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
CONTROLS/ DISPLAY/ REMOTE CONTROL
Temperature change and time setting can only be controlled by remote control
Power: On/ off switch.
•
•
Mode: Select the automatic, cooling, dehumidifying or ventilation mode.
Reserve: Time setting
•
Temperature, up/ down: To set the desired temperature and hours.
•
Fan speed: Fan speed.
•
•
Wind light: Displays the set wind speed. high or low.
Reserve light: The time can be set as soon as this light comes on.
•
Celsius/ Fahrenheit light: Select the desired unit, C or F.
•
Remote controle battery
First remove the protective film for the battery with a new battery. Press A and slide the
•
cover in direction B as shown above, and replace the old battery. The + points upwards.
Use the battery model CR 2035 3V.
Remove the battery if you will not be using the remote control for a long time.
o
Point the remote controller at the indoor unit to operate it.
o
Avoid moisture near the battery.
o
Always use the remote controller to the indoor unit.
•
28
Advertenties
Hoofdstukken
Inhoudsopgave
