Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
10.2 Setting up the scale and switching it on/off
1. Before use, allow the scale to reach room temperature for at least 1 hour in order
to obtain the best measuring results.
2. Screw in the 4 feet.
3. Place the scale on a solid, level and dry surface.
4. Use the spirit level (7) to check that the scale is aligned correctly. If necessary,
adjust its position with the adjustable feet.
5. To switch on the scale, press the ON/OFF button (9).
The display (2) will switch on and show the value "0.00".
Æ
6. Press the MODE button (4) repeatedly to select the desired unit:
– g → ct → dwt → gn → T → oz
Note:
– You can change the desired unit at any time.
7. Press the ON/OFF button (9) again to switch off the scale.
10.3 Weighing objects
1. Place the object you want to measure in the middle of the weighing plate (1).
2. Wait until the reading stabilises and the symbol
The weight of the object will be displayed.
Æ
3. Remove the object from the weighing plate (1).
Important:
– If the weight exceeds the weighing range, "O_Ld" will appear on the the
display. In this case, remove the object from the weighing plate immediately.
– You can use the supplied cover to prevent atmospheric influences from fal-
sifying the measuring result.
appears on the display.
25
Advertenties
Hoofdstukken
Inhoudsopgave
