m
u
u
Safety warnings specific for carving operations
a)
b)
c)
d)
e)
f)
g)
18
GB/IE/NI
1_389435_2201_Short_GB.indd 18
1_389435_2201_Short_GB.indd 18
WARNING!
Use only the specified mains adapter
Do not operate the mains adapter
Damaged mains plugs are hazardous to life due to the risk of electric shock.
Do not use the product for more than 30 minutes.
This power tool is intended to function as a carving tool. Read
all safety warnings, instructions, illustrations and specifications
provided with this power tool. Failure to follow all instructions listed below
may result in electric shock, fire and/or serious injury.
Wear personal protective equipment. Depending on application, use
face shield, safety goggles or safety glasses. As appropriate, wear
dust mask, hearing protectors, gloves and workshop apron capable
of stopping small abrasive or workpiece fragments. The eye protection
must be capable of stopping flying debris generated by various operations. The
dust mask or respirator must be capable of filtrating particles generated by your
operation. Prolonged exposure to high intensity noise may cause hearing loss.
Keep bystanders a safe distance away from work area. Anyone
entering the work area must wear personal protective equipment.
Fragments of workpiece or of a broken accessory may fly away and cause injury
beyond immediate area of operation.
Position the cord clear of the spinning accessory. If you lose control, the
cord may be cut or snagged and your hand or arm may be pulled into the spinning
accessory.
Never lay the power tool down until the accessory has come to a
complete stop. The spinning accessory may grab the surface and pull the power
tool out of your control.
Do not use accessories that require liquid coolants. Using water or other
liquid coolants may result in electrocution or shock.
6 ]
[
to charge this product.
6 ]
[
(not included) with a damaged mains plug.
08/08/2022 6:46:36 pm
08/08/2022 6:46:36 pm