Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
˜ Safety instructions for all applications
General safety instructions for milling
1)
2)
3)
4)
5)
6)
7)
8)
14
GB/IE/NI
1_389435_2201_Short_GB.indd 14
1_389435_2201_Short_GB.indd 14
This power tool is intended for use as an engraver tool. Follow all
safety instructions, instructions, diagrams and data that you receive
with the appliance. If you do not observe the following instructions, this can lead
to electrical shock, fire and/or serious injuries.
This power tool is not suitable for sanding, sandpaper grinding, wire
brushing, polishing or cut-off grinding. Applications for which the power
tool is not intended may cause hazards and injuries.
Do not use any accessories that have not been provided or
recommended by the manufacturer for this power tool. Just because
you can attach the accessories to your power tool, does not ensure they are safe to
use.
Grinding discs, sanding drums or other accessories must match the
grinding spindle or collet chuck of your power tool exactly. Accessory
tools which do not fit precisely into the take-up of the power tool will rotate unevenly,
vibrate severely and can lead to a loss of control.
Discs, grinding cylinders, cutting tools or other accessories mounted
on a mandrel must be completely inserted in the collet or chuck. Any
"protrusion" or exposed parts of the mandrel between the grinding
tool and the collet or chuck must be kept to a minimum. If the mandrel
is not sufficiently tightened or the grinding tool protrudes too far, the tool could come
loose and be thrown out at high speed.
Wear personal protective equipment. Depending on the application,
ensure that you use full face protection, eye protection or goggles.
If required, use a dust mask, ear protectors, protective gloves or a
special apron to protect you from grindings and material particles.
Protect your eyes from flying debris that may be created during certain applications.
Dust or filter masks must be used to filter any dust created by the application. If you
are exposed to loud noise for any length of time, you may suffer hearing loss.
Ensure that other people remain at a safe distance from your
workspace. Anyone who enters the workspace must wear personal
protective equipment. Fragments of the work piece or broken accessory tools
can fly off and cause injury – even outside the immediate working area.
Always hold the power tool firmly. When running up to full speed, the
torque of the motor can cause the power tool to twist.
08/08/2022 6:46:36 pm
08/08/2022 6:46:36 pm
Advertenties
Hoofdstukken
Inhoudsopgave
