Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Problem
The drive is not functioning.
The indicator lamp stays off.
The drive is not functioning.
The indicator lamp lights up.
The indicator lamp lights up continu-
ously.
The indicator lamp flashes.
The roller shutter does not carry out
any automatic drive commands.
The sensor falls off the window.
The roller shutter performs auto-
matic drive commands, although it
has been set to manual by another
transmitter or by a central control
unit.
The shading solution rises automat-
ically.
The shading solution automatically
lowers (sun threshold exceeded),
but at what seems to be the same
brightness (sunshine) rises again
after about 15 minutes.
What to do if...?
Insert the battery correctly or insert a
new battery.
Reduce the distance to the receiver.
Program the sensor in the receiver.
TEST mode is active, and will be de-
activated after at most 5 minutes.
Insert a new battery.
Press the manual/auto button re-
peatedly until the indicator lamp
lights up green.
Adjust the sun or twilight threshold.
Thoroughly clean the window and the
suction cup.
The transmission of automatic drive
commands by the sensor is not af-
fected by the manual/auto
changeover of an external transmit-
ter or the central control unit.
Press the manual/auto button at the
light sensor repeatedly until the in-
dicator lamp lights up red.
Raise the sun threshold, turn clock-
wise (higher number).
Remedy
27 - en
Advertenties
Hoofdstukken
Inhoudsopgave
