Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
ASH VACUUM
˜ Introduction
We congratulate you on the purchase of your
new product . You have chosen a high quality
product . The instructions for use are part of the
product . They contain important information
concerning safety, use and disposal . Before using
the product, please familiarise yourself with all
of the safety information and instructions for use .
Only use the product as described and for the
specified applications . If you pass the product on
to anyone else, please ensure that you also pass
on all the documentation with it .
˜ Intended use
This product is intended for removing cold
ash with a temperature not higher than
40 °C, and other cold small objects from
chimneys, charcoal stoves, ashtrays or
barbecue grills .
m
WARNING!
"Cold ash" is ash cooled down for a
u
sufficient time without any pockets of
embers inside . This can be confirmed by
scouring the ash for pockets of embers by
using metal tools before using the product .
Cold ash does not emit any recognizable
heat .
The product is not suitable for vacuuming the
following materials:
–
Liquids
–
Soot and glowing embers
–
Cement, gypsum and lime dust
–
Any materials that are combustible,
explosive or constitute a health hazard
–
Heating boilers and oil-burning ovens
m
WARNING!
Vacuum only ashes from admissible fuels!
u
Any other use or modification of the product
are considered improper use and can result
in hazards such as death, personal injury
and damage . The manufacturer is not liable
for any damages caused by improper use .
The product is exclusively intended for
household use . The product is not intended
for commercial use .
The crevice nozzle
cleaning carpets .
˜ Scope of delivery
After unpacking the product, check if the delivery
is complete and if all parts are in good condition .
Remove all packing materials before use .
1 Container lid (includes motor drive system
and housing)
1 Metal container
1 Hose
1 Crevice nozzle
1 Wire mesh (pre-installed)
1 Pleated filter (pre-installed)
3 Plastic footings (pre-installed)
1 Short manual
˜ Description of parts
Before reading, unfold the page containing
the illustrations and familiarise yourself with all
functions of the product .
Figure A:
Blow connector with notch
[
1 ]
Power cord holder
[
2 ]
Latch
[
3 ]
Vacuum connector with notch
[
4 ]
Metal container
[
5 ]
Plastic footings
[
6 ]
Crevice nozzle
[
7 ]
Hose
[
8 ]
Hose coupler
[
9 ]
Hose adaptor
[
10 ]
(outer Ø: 41 mm; inner Ø: 38 mm)
(Coupler marking)
[
11 ]
Carry handle
[
12 ]
Container lid
[
13 ]
Filter cleaning switch
[
14 ]
is not suitable for
7 ]
[
GB/IE/NI
7
Advertenties
Hoofdstukken
Inhoudsopgave
