Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
7 . Fixing the pleated filter
mesh
: Hold the pleated filter by the
[
20 ]
rim . Turn the pleated filter in a clockwise
direction . Once the pleated filter is fixed on
the filter thread
[
22 ]
place .
8 . The rim of the wire mesh
down the safety switch
product does not operate .
˜ Storage
Set the on/off switch
o
the power plug
18 ]
[
Let the product cool down .
˜ Troubleshooting
Fault
The product does not work .
The suction power is reduced
and the product does not
vacuum any dirt .
The suction power is reduced
even after cleaning the pleated
filter
.
21 ]
[
The product overheats .
14 GB/IE/NI
and the wire
19 ]
[
, it holds the wire mesh in
has to press
20 ]
[
. Otherwise, the
[
21 ]
to O . Disconnect
[
16 ]
from the power supply .
Possible cause
The power plug
connected to the power supply .
The metal container is
The air path is blocked .
The pleated filter
clogged .
The pleated filter
damaged .
Mesh wire
20 ]
[
pleated filter
Clean the product (see "Cleaning and
o
care") .
Wrap the power cord
o
cord holder
[
2 ]
Store the product and its accessories in a
o
dark, dry, frost-free, well-ventilated place .
Always store the product in a place that is
o
inaccessible to children .
The temperature for long term storage
o
(longer than 3 months) should be between
+10 and +30 °C with a relative humidity not
above 60 % .
Action
is not
Connect the power plug
[
18 ]
a suitable power supply .
full .
Empty the metal container
[
5 ]
(see "Emptying the metal
container") .
Check the following parts for
blockages and remove them:
5 ]
[
7 ]
[
[
8 ]
is
Clean the pleated filter
19 ]
[
(see "Cleaning the pleated
filter") .
is
Replace the pleated filter
19 ]
[
(see "Replacing the pleated
filter")
or
Clean the mesh wire
clogged .
pleated filter
[
19 ]
the pleated filter") .
around the power
18 ]
[
.
[
18 ]
[
5 ]
Metal container
Crevice nozzle
Hose
19 ]
[
19 ]
[
and the
[
20 ]
(see "Cleaning
[
19 ]
with
Advertenties
Hoofdstukken
Inhoudsopgave
