m
ATTENTION! Ensure that:
–
No foreign objects penetrate the product.
–
When using an optional USB power supply,
its operating instructions are observed.
In the event of wireless data transmission,
unauthorised third parties receiving the data
cannot be excluded.
Operating system updates
In order to keep the product up to date,
it is necessary that you always keep the
operating system of your smartphone up to
date.
Update the operating system regularly.
General information about this
product
Waterproofing (IP68)
Resistant to splashes, water and dust
(IEC Standard 60529: IP68 rating)
NOTE: Waterproofing is not an everlasting
feature, you can wear the product in everyday
life. Washing hands, showers, rain or similar
situations / activities are not harmful to the
product. The product is protected against short
immersion (maximum depth of 1 metre for up
to 30 minutes).
Before first use
After unpacking the product:
Charge the product (for details please refer to
the "Charging the battery" section).
Charge the product in time. The battery
performance will degrade if the voltage is too
low for a long time.
10 GB/IE/NI
Charging the battery
B
[
6 ]
[
8 ]
3 ]
[
[
3 ]
1. Hold the housing
[
6 ]
watch strap
with the other hand.
[
3 ]
2. Pull the housing
apart at the
mark
3. Connect the revealed USB plug
USB port.
4. When the battery is fully charged: Disconnect
8 ]
[
the USB plug
from the USB port.
5. Connect the USB plug
[
6 ]
strap
.
NOTES:
Make sure that the contacts of the USB
[
8 ]
plug
correctly engage with the contacts in
the USB port. If the product does not charge,
turn the USB plug 180° and plug it into the
USB port again.
The product turns on automatically as soon as
it is connected with the USB port.
The product cannot be operated during
charging.
The charging status is shown in the display
A charging cycle with a charging current of
approx. 92 mA takes approx. 1.5 hours.
with one hand. Hold the
6 ]
[
and the watch strap
4 ]
[
.
8 ]
[
to a free
8 ]
[
to the watch
2 ]
[
.