Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
OPERATION
Semi–automatic operation
If the oven is to be switched off at a given
time, then you should:
Set the oven function knob and the tem-
perature regulator knob to the setting at which
you want the oven to operate.
Press sensor
MENU
show:
80
Set the required time using sensors
< and >, within a range from 1 minute to 10
hours.
The set time will be introduced to the memory
after approx. 7 seconds and the display will
show AUTO function.
When the set time has passed the oven is
switched off automatically, the alarm signal
is activated and the signal function AUTO
flashing again;
Set the oven function knob and the tem-
perature regulator knob to the switched–off
position.
Press sensor
MENU
off the signal; the signal function will go out
and the display will show the current time.
Caution!
In ovens equipped with one control knob,
the oven function knob is integrated with the
temperature regulator knob.
until the display will
80
MENU
, < or > in order to switch
Automatic operation
If the oven is to be switched on for a specified
period of time and switched off at a fixed hour
then you should set the operation time and
the operation end time:
Press sensor
show:
80
Set the required time using the sensors
< and > within a range from 1 minute to 10
hours.
Press sensor
show:
88
Set the switch–off time (operation end time)
using sensors < and >, which is limited to a
period of 23 hours and 59 minutes from the
current time.
Set the oven function knob and the tem-
perature regulator knob to the setting at which
you want the oven to operate.
The signal lights by
the oven will start operating from the point
when the difference between the set op-
14
until the display will
MENU
80
MENU
until the display will
MENU
80
MENU
MENU
and
are now on;
Advertenties
Hoofdstukken
Inhoudsopgave
