Max. loading exceeded.
Covered ventilation grill.
Residue inside the drum.
To little free space around the appliance
Loading door
does not
Filters not locked in place.
close
Drying cycle
Small laundry volume./Too dry laundry
to short
for selected programme.
Fluff filters clogged.
To high loading volume.
Drying cycle
Laundry insufficiently spun.
4)
to long
Particularly high room temperature - no
machine fault.
1) Switch the dryer off. Set programme/time. Press the START PAUSE button.
2) follow program recommendation - see Programme overview chapter
3) see Care and cleaningchapter
4) Note: After around 5 hours the drying cycle ends automatically (see Drying cycle complete section).
Technical data
height x width x depth
drum volume
depth with the load door opened
adjustable height
the appliance weight
maximum load volume
voltage
necessary fuse
total power
energy efficiency class
energy consumption kWh/cycle
annual energy consumption
type of use
permitted ambient temperature
1) 6 kg of cotton, centrifuged at 1000 rpm with reference to EN 61121
Service
In the event of technical faults, please first
check whether you can remedy the prob-
lem yourself with the help of the operating
instructions (Chapter "What to do if...").
85 x 60 x 58 cm
108 l
109 cm
1.5 cm
31,5 kg
6 kg
230 V
10 A
2200 W
C
1)
3,3 kWh
259 kWh
Domestic
+ 5°C to + 35°C
If you were not able to remedy the problem
yourself, please contact your local service
centre.
In order to be able to assist you quickly, we
require the following information:
Respect max. loading volume.
Uncover ventilation grill in base area.
Clean the drum inside.
Ensure min. 5cm free space around the
appliance
Install fine filter and/or snap course filter
into place.
Select time programme or higher drying
level (e.g. EXTRA DRY ).
Clean fluff filters.
Respect max. loading volume.
Spun adequately the laundry.
Lower the room temperature if possible.
29