Inhoudsopgave
Advertenties
Als USB-C Charging
uitschakelen, wanneer u OSD-item van USB-C Prioriteit selecteert op Hoge Resolutie of
Hoge Gegevenssnelheid in Weergavefunctie, zal het volgende bericht verschijnen:
U2720Q
Dell UltraSharp 27 Monitor
Dynamic switching of USB-C Prioritization is disabled when
Always On USB-C Charging is enabled.
To change USB-C Prioritization:
1. Shutdown the PC
2. Activate Input Source menu
3. Press and hold
key on USB Type-C input for 8 seconds.
Wanneer USB-C Charging
uitschakelen en USB-C prioritering is ingesteld op Hoge gegevenssnelheid:
• Als u OSD items van Fabrieksinstellingen in de optie Overige selecteert, verschijnt het
volgende bericht:
U2720Q
Dell UltraSharp 27 Monitor
If your PC is Dell Optiplex Ultra and powerd from USB-C, you need to carry
out the following steps before resetting:
1. Select 'No'
2. Go to Monitor Menu: Set Personalize > USB-C Charging > On During Power O
Note: Please disconnect any USB storage device to your monitor during
the switching process (up to 12 seconds).
Do you want to continue?
Yes
• Selecteer OSD-items van Display (Scherm) resetten in Display (Scherm) functie, het
volgende bericht zal verschijnen:
U2720Q
Dell UltraSharp 27 Monitor
If your PC is Dell Optiplex Ultra and powerd from USB-C, you need to carry
out the following steps before resetting:
1. Select 'No'
2. Go to Monitor Menu: Set Personalize > USB-C Charging > On During Power O
Note: Please disconnect any USB storage device to your monitor during
the switching process (up to 12 seconds).
Do you want to continue?
Yes
90 W (USB-C opladen
U2720Q
90 W (USB-C opladen
No
U2720Q
No
U2720Q
90 W) is ingesteld op Aan tijdens
U2720QM
Dell UltraSharp 27 Monitor
Dynamic switching of USB-C Prioritization is disabled when
Always On USB-C Charging is enabled.
To change USB-C Prioritization:1. Shutdown the PC
2. Activate Input Source menu
3. Press and hold
key on USB Type-C input for 8 seconds.
90 W) is ingesteld op Uit tijdens
U2720QM
Dell UltraSharp 27 Monitor
If your PC is Dell Optiplex Ultra and powerd from USB-C, you need to carry
out the following steps before resetting:
1. Select 'No'
2. Go to Monitor Menu: Set Personalize > USB-C Charging > On During Power O
Note: Please disconnect any USB storage device to your monitor during
the switching process (up to 12 seconds).
Do you want to continue?
Yes
U2720QM
Dell UltraSharp 27 Monitor
If your PC is Dell Optiplex Ultra and powerd from USB-C, you need to carry
out the following steps before resetting:
1. Select 'No'
2. Go to Monitor Menu: Set Personalize > USB-C Charging > On During Power O
Note: Please disconnect any USB storage device to your monitor during
the switching process (up to 12 seconds).
Do you want to continue?
Yes
De monitor bedienen
U2720QM
No
U2720QM
No
U2720QM
|
51
Advertenties
Inhoudsopgave
