Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
The furniture door frame can be custom made (by the kitchen reseller) to line
up with your other furniture doors in the kitchen. The door must be finished on
both sides in order to prevent warping.
Note:
The door panel must not weight more than 10kg.
Note:
We recommend the door thickness does not exceed 18mm. If a thicker
door is used, the door may make contact with the adjacent furniture door
when opened.
Steps
1. If you want to adjust the height over 820mm, please install the product
using the foot sliders provided. These are provided to help prevent the
feet catching on the floor when sliding the appliance into the aperture.
BACK
2. To level you wine cabinet, adjust the front and back by leveling adjustable
legs at the bottom of the cabinet (to 4mm less than the recess or handlebar
height). Ensure it's perfectly leveled, as this will minimize any vibrations and
noises.
3. Slide in the appliance until the front surface of the appliance door is behind
the cabinet fronts. Place the furniture door frame on the cabinet to determine
the right installation depth. Please make sure when sliding in the appliance,
that the power supply cord is not damaged.
4. The included bracket will keep the product secure and help prevent it moving
when in use. Line the fixing bracket with the two holes at the top of the wine
cabinet. Use the screws to secure into position. Use the screws to secure the
bracket to the side of the kitchen cabinet.
13
FRONT
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
