Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
INSTALLATION INSTRUCTION ROBOT
NOTE
• Please do not move the charging station without reason and keep it
out of direct sunlight.
• If the charging station is relocated, the robot may fail in positioning
and lose the map. When restarted, the robot will rebuild and memorise
the map. In the rebuilt map the cleaning information for forbidden
areas and other areas may have been lost.
• Direct sunlight will interfere with the recharging signal and
consequently, the robot may be unable to return to the charging
station.
• The robot cannot be used to remove liquids.
• If the battery level is less than 20% the machine will not work. Please
charge it.
• The machine will return to the charging station automatically if the
battery level is less than 20% when in use and will be powered o and
then start cleaning automatically after the battery level reaches 80%.
• Please clear various wires (including the power line of the charging
station ) from the ground before use to avoid outage and damage of
objects or wires when wires are dragged by the robot.
FAULT STATE
If the robot encouters a fault while working, the power
indicator blinks quickly in red, and a voice prompt is generated.
NOTE
•
If no operation is peformed beyond 10 minutes, the robot
automatically enters in sleep mode.
•
Put the robot back to charging in fault state, the clenaing will
end.
EN
9
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
