Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
MAINTENANCE
COMPONENT MAINTENANCE
Regular maintenance
To achieve the best cleaning e ect, clean and maintain the robot regulary
according to below table. Determine the frequency of cleaning and
maintenance according to your use habits.
CLEANING
PARTS
FREQUENCY
Filter
Roller brush
Side brush
Monthly
Monthly
Roller brush cover
Monthly
Sensor
Monthly
Charging pins
Universal wheel
Monthly
REPLACEMENT
FREQUENCY
Weekly
Every 2 months
Weekly
Every 6 to 12 months
Every 3 to 6 months or when it
is obviously damaged
Every 3 to 6 months or when
the rubber silicon strip on the
roller brush cover is obviously
damaged
When it is obviously damaged
-
-
BATTERY
· The robot is furnished with high-performance lithium-ion batteries.
· To maintain battery performance, please keep the robot charged in daily use
· If the machine is left unused for any length of time, please shut down
and keep it properly.
· Charge it at least every three months to avoid damaging batteries due to
excessive discharge.
FIRMWARE UPGRADE
· Upgrade rmware using the Bluebot app. If new rmware is detected,
upgrade it according to the report.
· The battery level should be ≥ 50% during rmware upgrade, so if needed
the machine should be placed on the charging station to charge before the
rmware upgrade takes place.
SYSTEM RESET
· Press the 'reset key' on the side of the robot for at least 5 seconds. Make
sure that you place the robot back on its charging station.
· The current map and timing will be lost, WIFI and personalised settings
will be reserved after reset.
EN
19
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
