Advertenties
Beschikbare talen
Beschikbare talen
R E V I E W O F M E C H A N I C A L C O N T R O L ( s e e p a g e 1 , f i g . 1 )
CONTROL PANEL — DESCRIPTION OF SYMBOLS AND OPERATIONS
3 − THERMOSTAT POSITION INDICATOR marked with the symbol
F 245)
When the appliance door is closed, the thermostat position is seen on the thermostat position
indicator.
4 − ELECTRICITY SUPPLY INDICATOR marked with the symbol
When the appliance is connected to the electricity supply, the green indicator light is
illuminated. Simultaneously also the the temperature rise indicator lights
indicates that the freezer was switched off for a longer time, i.e. the freezer is switched on
for the first time, after defrosting or after losing of voltage. When the temperature in the
compartment again falls below -9 ºC, the indicator light will go out.
6 − THE TEMPERATURE RISE INDICATOR marked with the symbol
F 245).
When the temperature in the freezer compartment rises above -9 ºC, the red indicator
light is illuminated. It indicates that:
• The freezer was switched off for a longer time, i.e. the freezer is switched on for the first
time, after defrosting or after losing of voltage.
• The door of the freezer is opened or is being opened too frequently.
• It is loaded a large amount of unfrozen foodstuffs.
• The freezing system is failed, i.e. the indicator does not go out longer 6 hours and
it is heard running compressor or the compressor does not switch on. In this case
you should apply to your service agent (at first make sure that three above items
were taken into account).
P R E P A R I N G T H E A P P L I A N C E F O R O P E R A T I O N
It is recommended to prepare the appliance for operation with a helper.
• Remove package. Lift the appliance away from foamed polystyrene base.
If your freezer is fit with screwed handles. Do not rise or push it taking by
handles. Handles may break.
• Tear off adhesive tapes.
• When positioning the appliance in chosen location, it will move more
easily into position if you lift the front a little and incline it backward,
allowing it to roll on its casters.
• Remove the support from the bottom cover
adhesive tapes from the door trays – they are intended only for the
transport of the appliance.
All manuals and user guides at all-guides.com
(fig. 2). Tear away the
• Suitably
dispose
material.
• Take two supports from the bag and insert them into the guides
at the top back part of the appliance (fig. 3).
ATTENTION! In order to fix the upper small door when closing,
the upper corners of the door till a click (see page 1, fig. 1).
7
(marked for model
(marked for model F 245)
(marked for model
the
packaging
up.
It
Advertenties
