Download Print deze pagina

SNAIGE F 245 Gebruiksaanwijzing pagina 14

Advertenties

Beschikbare talen

Beschikbare talen

OPERATION PROBLEMS AND THEIR SOLUTIONS (TROUBLESHOOTING)
What if ...
• The appliance is plugged in to the mains but it does not work and the electricity supply
voltage indicator is not illuminated. Check that your house electricity supply installations are in
order. Check that the plug is correctly inserted into the electricity supply socket.
• The noise has become louder. Check that the appliance is standing stable on a level place. To
make it level, regulate the front feet. Check if the appliance is not touching any furniture and that
no part of the refrigeration system at the back part of the appliance body is touching the wall.
Pull the appliance away from any furniture or walls. Check that the cause of increased noise isn't
due to bottles, cans or dishes in the appliance that might be touching each other.
• When the appliance door is opened, the rubber sealing gasket pulls out. The gasket is
smeared with sticky foodstuffs (fat, syrup). Clean the sealing gasket and the groove for it with
warm water containing soap or dishwashing detergent and wipe dry. Put the rubber sealing
gasket back into the place.
• The temperature rise indicator light is illuminated red. This means the appliance is being
connected to the electricity supply for the first time or it was disconnected for a significant period
(for thawing or during an interruption to the electricity supply), the freezer door is not closed or
is being frequently opened and closed, or a large amount of fresh food has been put in, and
therefore the temperature in the compartment has risen above -9 ºC. When the temperature in
the
compartment
ATTENTION! If the temperature indicator light does not go out (for reasons other
than those listed above) for longer than six hours, the compressor is either working
constantly or is not functioning. You need to consult service people.
• High temperature in appliance, the compressor operation pauses are short. Ascertain
whether the appliance door are shutting tightly, whether the door wasn't kept open longer than
necessary when taking out or putting in foodstuffs or whether a large amount of warm food was
placed in the appliance.
• The top of the appliance has condensation on it. The ambient relative air humidity is
above 70 %. Ventilate the room where the appliance stands and if possible remove the cause
of the humidity.
THE MANUFACTURER WILL NOT BE RESPONSIBLE FOR ANY DAMAGE OF THE APPLIANCE
THAT
RESULTS
TRANSPORTATION.
• The appliance should be transported in the vertical position.
• When being transported, the appliance should be protected from atmospheric conditions (rain,
snow, dampness).
• The appliance should be firmly secured in place while being transported, to avoid slippage or any
shocks in the transport vehicle.
• If the appliance was transported not vertically, it may be connected to the mains after 4 hours at
least. If this is not done, the appliance compressor may fail.
IF YOUR APPLIANCE IS NOT WORKING PROPERLY, ASCERTAIN WHETHER YOU CAN REMEDY THE
CAUSE OF THE FAULTY FUNCTIONING OF THE APPLIANCE
YOURSELF.
If you cannot solve the problem yourself,
contact the nearest refrigerator service representative by
telephone or in writing. When making contact necessarily
indicate the refrigerator model 1 and number 2. You will
find this data on the product label, which is glued to the
wall of the freezer compartment.
All manuals and user guides at all-guides.com
again
falls
below
T R A N S P O R T
FROM
NON-COMPLIANCE
W A R R A N T Y S E R V I C E
-9
ºC,
the
indicator
WITH
THE
12
light
will
go
out.
INSTRUCTIONS
FOR

Advertenties

loading

Deze handleiding is ook geschikt voor:

F 100