Advertenties
Beschikbare talen
Beschikbare talen
C H A N G I N G T H E O P E N I N G D I R E C T I O N O F T H E D O O R S
It is recommended that changing the opening direction of the doors should be done with a helper.
You will need two spanners No. 8 and No. 10 and a Philips head screwdriver.
When changing the opening direction of the doors, YOU CAN NOT lay the refrigerator horizontally.
Do the actions below in the order they are listed:
W A R N I N G ! Turn off the refrigerator and pull the plug out of the electricity supply
outlet.
For model F 245 see page 2, fig. 6
1. Remove bottom bracket 1. Remove bottom bracket 2 together with the washers on the axle
and the plastic spacer. Remove compartment door.
2. Remove cap 4 from the refrigerator door and press it in on the opposite side.
3. Unscrew axle 5 by turning it counter-clockwise. Remove it together with the bolt and washers.
4. On the opposite side, screw in axle 5 in a clockwise direction together with the bolt and
washers.
5. Turn bracket 2, together with the nuts on the axle and the plastic spacer, around a full 180°,
replacing the nuts on the axle and tightening them on the opposite side.
6. Screw bottom bracket 4 together with the washers on the axle and the plastic spacer into the
place for bracket 2. Screw bracket 2 into the place for bracket 4. Remove bolt caps (a) and
plugs (b). Unscrew the bolts holding the handles in place. Move the handles to the other side.
Screw on. Press plugs into the remaining apertures in the door and cover bolts with caps a.
7. Replace bottom lid 1.
For model F100 see page 3, fig. 7
1.
Remove support 1 and undo screws 2.
2.
Undo the two screws 3 that hold the pull-out shelf.
3.
Remove pull-out shelf 4.
4.
Take off bracket 5 together with the washers that are on the axle.
5.
Unscrew the axle from bracket 5 together with its washers and screw it into the second
aperture of bracket 5.
6.
Remove compartment door.
7.
Remove plug 7 from refrigerator door and press it in on the opposite side.
8.
Take off bottom bracket 8 together with the washers that are on the axle. Unscrew the axle by
turning it counter-clockwise. Turn bracket 6 around a full 180° and screw the axle back in. Fix
the bracket in place on the opposite side.
9.
Mount refrigerator compartment door on the axle of bracket 8.
10.
Fix bracket 5 in place together with the washers that are on the axle.
11.
Put the pull-out shelf back in place and replace screws 2 and 3. Place support 1 in the groove
at the top back part of the refrigerator.
12.
Remove bolt caps a and plugs b. Unscrew the bolts holding the handles in place. Move the
handles to the other side. Screw on. Press plugs into the remaining apertures in the door and
cover bolts with caps a.
All manuals and user guides at all-guides.com
11
Advertenties
