Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
If this has all been checked, you can insert the plug into the socket. Start the unit by
pressing on the ON/OFF button.
Use the Function selector button to choose a specific function: cool, dehumidify or
fan. Every time you press the button, the function changes. The lights show which
function is active. If you are cooling or dehumidifying, wait for up to 3 minutes after
switching on or off before switching the unit on or off again. The compressor needs
this time to recover.
Use the Fan speed button to set the fan to high or low.
If you wish to cool, you can use increase or decrease the temperature using the
Temperature up/down buttons. Every time you press these buttons, the set
temperature will increase or decrease by one degree. The display shows the value
set. The temperature can be set to between 16 and 31°C.
If you wish to dehumidify, press the function selector button until the 'dehum' light
comes on. Check that the water outlet hose is correctly connected, see page 22! The
temperature will be automatically set to 2 degrees below room temperature (16°C to
31°C).
The fan speed will be automatically set to 'LOW'.
Using the functions 'cooling' and 'dehumidifying', the apparatus will occasionally stop
in order to protect the compressor. The apparatus will restart after approx. 3
minutes. Do NOT change any settings in the meantime!
If you set the apparatus to 'cooling' or 'dehumidifying', it will continuously operate
unless:
The room temperature becomes lower than the set temperature.
The timer is set to a final time.
If you wish to ventilate, use the function selector button to choose 'fan'; you can
then set fan speed to high or low using the fan speed button.
The Timer button allows you to automatically start or stop the air conditioner at a
set time.
Automatic starting: the air conditioner is off. Press the timer button and choose the
moment that you would like it to start working using the temperature buttons: each
time you press 'temperature up' the hour will increase, each time you press
'temperature down', the hour will decrease. If, for example, the display shows 5
hours, the air conditioner will switch on in 5 hours.
Automatic stopping: the air conditioner is on. Press the timer button and choose the
moment that you would like it to stop working using the temperature buttons: each
time you press 'temperature up' the hour will increase, each time you press
'temperature down', the hour will decrease. If, for example, the display shows 2
hours, the air conditioner will switch off in 2 hours. The timer can be set to between 1
to 24 hours.
21
Advertenties
Inhoudsopgave
