Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Description
1. rear panel
2. air inlet
3. front panel
4. operating panel (top)
5. air inlet
6. electrical cable with
plug
7. wheels
8. waste pipe connection
hot air
9. water drainage point
Accessories
A. Outlet hose hot air
B. Connector window panel
C. Connector air conditioner
D. Window panel
E. Cover wall-connection
Installation
The EUROM PAC7.2 and PAC9.2 are
mobile air conditioning/ dehumidifying units that can be moved from room to room.
Install as follows:
Remove all packaging material, keep it away from children and ensure that the
unit remains in an upright position.
Before use, check that all accessories are present and that there is no damage to
the accessories or the unit itself. Do not use a damaged unit; take it back to your
supplier!
Place the unit on a sturdy, flat, dry and horizontal base near an electrical socket
and a discharge point for hot air, e.g. a window that can be opened slightly. Make
sure that the unit has at least 30 cm of free space on all sides and take all safety
instructions into account.
To use the dehumidification function, connect the water drainage hose to the
water drainage point (9). This hose should lead to a bucket or drain. The hose
should not run upwards! Your unit is now ready for use.
In order to use the cooling function, you do not need to connect the water
drainage hose. Place window panel in the window opening, see diagram. The
length of the window panel can be adjusted from 67.5 to 123 cm.
side
front
back
19
Advertenties
Inhoudsopgave
