EN
When the corresponding 'ON' or 'OFF'
button is activated on the switch channel on
the radio transmitter the switch contact and
thus the mains to the consumer is switched
on (the LED (1) lights up) or off (the LED
(1) goes out).
DIMMER FUNCTION
Switch the receiver on by pressing briefly
on the 'ON' button of the corresponding
switch channel on the radio transmitter. If
the receiver is on and the consumer (the
lamp) is receiving power, then the dimmer
function can be started by pressing the 'ON'
button. A further press on the 'ON' button
ends the dimmer process and the brightness
of the lamp stays at this level.
MAINTENANCE AND
CLEANING
Servicing or repair works can only be
performed by a qualified person or at
20
a special service centre. There are no
components in the product that need
to be serviced. At no point must it be
opened or disassembled given the
danger of electric shock.
•
The external surface can be cleaned by
using a dry, soft and clean cloth. Do not
press too hard on the front panel or on the
casing, as this can leave scratch marks on
the surface.
•
Dust can be easily removed by using a soft
and clean brush with long hairs and bristles
and a vacuum cleaner.
•
In no event must an aggressive cleaning
agent or other chemical solutions be used
since that can affect the casing or impair its
proper functioning.