Advertenties
Beschikbare talen
Beschikbare talen
Operations
In order to operate the tool safely, please observe the following notes:
Details of the work area
Keep the work area free of everything which could obstruct operations.
Provide for adequate illumination of the work area.
Adhere to the regulations concerning the power connection.
Lay the power cable in such a way that any damage by the drill can be
avoided.
Make sure to always keep the work area in view and to be able to reach all
necessary operating elements and safety installations.
Keep other persons away from your work area in order to avoid accidents.
Space requirements for operating and maintenance
Whenever possible, keep a free space for operating and maintenance of about
2 m around the drill position, so that you can work safely and have immediate
access in case of a failure.
10
9
Drilling
8
For drilling in niches and corners, the drill
column can be swivelled by up to 360°.
To do so, open the clamping lever (8), turn
the drill column into the desired position and
close the clamping lever.
The lateral support (9) increases the
clamping force especially for large drilling
diameters.
Its height is adjustable on the column using
the clamping lever (10) and can thus be
optimally adjusted to different heights.
Make sure that the support is always
fitted securely.
At the beginning, drill very slowly, since
the drill bit does only starts cutting with a
fraction of the cut surface in the
material. If you drill too fast or with too
much pressure, the drill bit could get
jammed.
In order to reach the max. drilling
depth, you probably have to use an
extension for the drill bit!
12
Advertenties
