Advertenties
Beschikbare talen
Beschikbare talen
Fastening of the Drill Rig
First open the 2 levers (3) on the
suction feet.
Position the drill stand at the
desired place.
The surface must be absolutely
level and smooth.
Close the levers (3) and check that
the drill stand is secure.
Fixing the Core Drill Motor
Wear protective gloves!
Caution! When mounting the machine, risk of squashing.
Move the machine holder (4) upwards
until the locking pin (5) locks in the
4
column.
Remove both Allen screws M8 (6) and
5
take off the clamp (7).
7
6
Put the core drill (M) on the carriage and
close the clamp (7) by means of the Allen
screws (6).
M
11
3
Advertenties
