Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
5. To lock the lid onto the filter cone, align the slot of the lid's edge to the tab of the bottom
part of the cone. Push the lid on the cone and turn the lid anticlockwise until it stops. Attach
the filter cone to the transparent case.
Caution! Replace a damaged filter cone immediately with a new one before the next operation.
6. To re-position the transparent canister (with filter cone inside) onto the
rear body, make sure the locking knob on each side is turned to the
unlocked position. Align the raised arches on both sides of the
transparent canister with the locking knobs and turn each knob
clockwise until it points towards the red marking to secure the
assembly.
Important! The case has one correct position only. The water-draining valve must be facing the
bottom when holding the cleaner horizontally by the handle.
Maintenance & storage
Important!
Battery discharges on its own during storage. Make sure to fully-charge the pool vacuum before
-
storage.
You must re-charge the battery at least once every three months when it is not in use.
-
1. Unplug the external adaptor from socket and then unplug the adapter jack from the
charging base.
2. Detach accessories from the pool vacuum. If necessary, rinse the pool vacuum and
accessories with fresh water. DO NOT use detergent.
3. Make sure to drain the water from the rear body through the holes located inside the
chamber that connects to the handle/ pole connector, and the hole on the rear of the
body.
24
Advertenties
Inhoudsopgave
Probleemoplossen
