Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
4. Silent alarm
4.1 Opening with alarm code
The lock opens normally after entering the alarm code. Simultaneously a relay is triggered by which the alarm
code can be signalled to a burglar alarm system. Alarm code: the number to be added to the last number of the
code. Usually this is 1.
Step
1.
Enter the user or master code, e.g. 5678913+1
2.
Turn the handle within 3 seconds into opening position, the lock
is opened
If the result becomes double-digit, only the last number is taken (e.g. 9+1=10, enter only 0).
5. Blocking / unblocking
5.1 Temporary block / unblocking all users
You can use the master code to temporarily block all users, and you can use the same procedure to unblock
them again. Their programmed user codes will then be valid again.
Step
1.
Press and hold the '2' button until the red light stays on
2.
Enter the master code, for example, 5678913
Once all the user codes have been blocked, the safe can only be opened with the master code.
Please note, if the user codes are to be used again, they must be unblocked with the master code first
6. Overview
6.1 User overview
This function allows you to see which ID numbers are in use and which are still free. Their user codes can only be
checked with the master code, however. If there is just one sound, then the ID number is still free or non-active. If
the sound is made twice, then the ID number is in use or the user is active.
Step
1.
Press and hold the '7' button until the red light stays on
2.
Enter the master code, for example, 5678913, and the red light
goes out
3.
Enter the ID number of the user you want to check,
for example 2
4.
Enter 0 to stop
Action
Action
Action
Key
5678914
Key
2
5678913
Key
7
5678913
02
(FREE)
0
(OCCUPIED)
23
Advertenties
Inhoudsopgave
