Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
USER MANUAL ELECTRONIC LOCK MULTICODE
2.3 Deleting user
Step
1.
Press and hold the '3' button until the red light stays on
2.
Key in the master code, for example 5678913
3.
Key in the ID code, for example 6
(the red light goes out)
The user code has been deleted. Only the master code remains valid. If the user code deletion is unsuccessful,
you hear a long signal. In that case, start again at step 1 for deleting the user code.
3. Opening delay and opening window
The opening delay can be 1 to 99 minutes:
This the waiting time before you can open the lock.
The opening window time can be 1 to 19 minutes:
You have to enter the code again to open the safe during this window (the period in which you can open it).
3.1 Programming the opening delay and opening window
Make sure that the safe door is open while you change the opening delay and window (key in seven digit code).
Step
1.
Press and hold the '9' button until the red light stays on
2.
Key in the master code, for example 5678913
3.
Enter the opening delay using two digits, for example
10 minutes
4.
Enter the opening window using two digits, for example
5 minutes
5.
Repeat the opening delay time
6.
Repeat the opening window time
(the red light goes out)
If the red light goes out during programming, you have waited too long to make an entry. In that case, start again
at step 1.
20
Action
Key in code - start opening delay
Waiting time opening delay
Opening window - re-enter your code
Action
Key
3
5678913
06
Key
9
5679813
10
05
10
05
Advertenties
Inhoudsopgave
