Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
USER MANUAL ELECTRONIC LOCK MULTICODE
3.4 Deactivating the opening delay
You can only change the opening delay during the opening window.
Step
1.
Enter the user or master code, for example 5678913
2.
The opening delay time starts, the red light illuminates every
few seconds
3.
When the opening delay has elapsed, you will hear an audible
signal and the opening window begins. The light illuminates
every few seconds.
4.
Press and hold the '9' button until the red light stays on
5.
Key in the master code, for example 5678913
6.
Key in 00 (= 0 minutes) to deactivate the opening delay
7.
Key in 01 to deactivate opening window
8.
Repeat 00 to deactivate the opening delay
9.
Repeat 01 to deactivate opening window.
The opening delay is now disabled.
3.5 Skipping the delayed opening (instant opening code)
If the safe has a delayed opening, it is still possible to gain immediate access. The code for user number 9 is also
a special instant opening code. You must, of course, create user number 9 beforehand (see 2.2). Please note that
the code for user number 9 must not be the same as the master code.
Step
1.
Enter the user or master code, for example 5678913
2.
The opening delay time starts, the red lamp light up every few
seconds
3.
Key in the code of user 9 for instant opening of the lock, for
example 9191911
4.
If you turn the handle within 3 seconds, you can access the safe
without having to wait for the delayed opening.
If the sum ends in two digits, you only need to enter the last digit. For example: your code is 3456789. The last
digit is 9+1 = 10. In this case, you enter '0' as the last digit.
22
Action
Action
Key
5678913
9
5678913
00
01
00
01
Key
5678913
9191911
Advertenties
Inhoudsopgave
