Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
3 Operating
GB
3.3
4. During nebulization, press button
Use
5. The button
6. Turn the vent outlet
7. Press the button
8. Press the button
NOTES:
•
•
•
20
the remote control to activate the automatic switch off function of the
device. The adjusted preset time (1 to 9 hours) shortly flashes in the
2
display
.
resp.
With activated warmth function "Hybrid" appears in the display
the device will nebulize warm mist.
mote control to activate the night-mode. The
the display, but will go off after 5 seconds. The nebulization continues
while the display will be switched off. Press the
on the display again shortly and press the
deactivate the night-mode.
w
5
panel
of the device to switch off the nebulization. It will stop imme-
diately, but the fan of the device is still running for about 30 seconds.
If you touch or press a button during normal operation or
during night-mode, the current state of the function will be dis-
played first. You may change the function with further presses
only. An exception to this is the
The device features a memory function. If you switch on the
appliance, it will start running using the last adjusted settings
for level and humidity value.
If too less water is in the tank or if the tank is not correctly
mounted or the appliance is placed on an uneven area (so that
the ground switch
up and the device will stop the nebulization.
9
activates / deactivates the warmth function.
1
to change the direction of mist output.
on the device resp. the button
on the remote control or
i
is triggered), a red warning light will light
on device or button
e
- symbol appears in
-button to switch
- button another time to
on the control
- button.
0
on
2
and
on the re-
Advertenties
Inhoudsopgave
