Download Inhoudsopgave Inhoud Print deze pagina

Warning - Battery Safety Information - Medisana AH 675 Gebruiksaanwijzing

Met hygrometer
Inhoudsopgave

Advertenties

Beschikbare talen

Beschikbare talen

WARNING - BATTERY SAFETY INFORMATION

Do not disassemble batteries!
Clean the battery and device contacts if necessary before
putting in the battery!
Remove discharged batteries from the device immediately!
Increased risk of leakage, avoid contact with skin, eyes and
mucous membranes! If battery acid comes in contact with any
of this parts, rinse the affected area with copious amounts of
fresh water and seek medical attention immediately!
If a battery has been swallowed seek medical attention imme-
diately!
Only replace with a battery of the same type!
Insert the battery correctly, observing the polarity!
Keep the battery compartment well sealed!
Remove the battery from the device if it is not going to be
used for an extended period!
Keep batteries out of children's reach!
Do not attempt to recharge batteries! There is a danger of
explosion!
Do not short circuit! There is a danger of explosion!
Do not throw into a fire! There is a danger of explosion!
Keep unused batteries in their packaging away from metal
objects in order to prevent short circuiting!
1. Briefly press the button
3.3
Use
panel
2. The button
control enable the following functions:
Press 1x (1 transverse bar is displayed
low level = little mist
Press 2x (2 transverse bars are displayed
medium level = medium quantity of mist
Press 3x (3 transverse bars are displayed
high level = a lot of mist.
The digital display
to 3 bars.
3. You may preset the desired air humidity with the button
the remote control or the button
range of 40% to 75%. Each press of the button changes the value by
5%. The display
time, afterwards it will proceed to the current air humidty indication.
Depending on the setting, the device now switches the nebulization on
or off in order to achieve / maintain the desired preset value.
w
5
of the device to switch on the appliance.
on the device resp. the button
2
indicates the current adjusted level in form of 1
indicates the adjusted value flashing for a short
2
on the remote control or
8
) :
on the control panel
3 Operating
on the control
on the remote
) :
) :
q
on
5
in the
GB
19

Advertenties

Inhoudsopgave
loading

Deze handleiding is ook geschikt voor:

60025

Inhoudsopgave