Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
3. INSTALLATION INSTRUCTIONS
3.3 Preparing the Water Hose and the
Electrical Connection
Inspect all water connections for leaks. Water
leaks can cause significant damage over time. It is
recommended to use a 6.4 mm (1/4") water line
with a minimum length of 1.5 metres (60") with
a threaded 6.4 mm (1/4") female connector end.
Before finishing the installation, turn the water on
to ensure that water is flowing and that there are
no leaks.
A connector that has a thread with an external
diameter of 6.4 mm (1/4") must be used to connect
the end of the hose to the product.
Allow for sufficient slack in the water supply line,
providing a minimum of 254 mm (10") of length from
the base of the unit once it is installed in the niche.
This provides some allowance for connections and
adjustments if needed.
The product must be connected to a 2-prong outlet
on a dedicated 15 amp circuit; local electrical and
building codes should be respected.
You can choose method A or method B below to
prevent the power cord from getting wedged in.
• Method A: Position the water hose and the mains
power connections on the back.
Power cord location
Water line location
28
28
• Method B: Position the water hose and mains
power connections on the side.
Keep open for water line
Water hose
3.4 Installation in the cabinet
Taking the Refrigerator from the Wooden Pallet
• Remove
the
brackets
refrigerator to the wooden pallet as shown below.
Keep for power cord
which
secure
the
Advertenties
Hoofdstukken
Inhoudsopgave
