Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
7
troubleshooting
FAULTCODE
DESCRIPTION
Inadequate water supply
F5
Water supply is not stopping.
F3
The waste water can not be discharged.
F2
The water temperature is not correct.
F8
Heating defect.
Safety is activated against water
F1
overflow.
FE
Faulty electronics.
F7
Overheating error.
F9
Position of the distributor error.
F6
Faulty heat sensor.
42
•
English
CHECK
• Check whether the tap is fully open and there is nothing
blocking the water mains.
• Close the tap, remove the input hose and check whether it
is clogged.
• Start the dishwasher again. Contact the service department
of Inventum when the error remains.
• Close the tap.
• Contact the service department of Inventum.
• The water discharge hose is
clogged.
• The filters might be clogged.
• Turn the dishwasher off. Reset the dishwasher's program
and check the filters and the discharge hose. Restart the
dishwasher.
• Contact the service department of Inventum when the error
remains.
• Contact the service department of Inventum.
• Turn off the dishwasher and close the tap.
• Contact the service department of Inventum.
• Contact the service department of Inventum.
• Contact the service department of Inventum.
• Contact the service department of Inventum.
• Contact the service department of Inventum.
Advertenties
Hoofdstukken
Inhoudsopgave
