Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
2. Turn the main filter (A) counter-clockwise to remove it.
Note:
The micro filter is attached to the main filter.
3. Remove the main filter (A) from the micro filter (B).
4. Remove the sieve (C).
5. Clean the main filter, the micro filter and the sieve. Use warm water and a dishwasing brush.
6. Install the sieve.
7. Install the main filter into the micro filter. Make sure that the markers are aligned.
8. Install the main filter into the sieve.
9. Turn the main filter clockwise to fasten it.
Caution:
Make sure that the filters are placed correctly. Incorrect placement of the filters affects the maximum
performance of the appliance.
CLEANING THE SPRAY ARMS
1. Remove the upper and lower basket.
2. Remove the nut (A).
3. Remove the upper spray arm (B).
4. Pull the lower spray arm (C) upwards to remove it.
5. Clean the spray arms. Use warm water.
6. Install the lower spray arm (C).
7. Install the upper spray arm (B).
8. Tighten the nut (A).
7
Extra information
WATER HARDNESS LEVEL SETTINGS (SALT CONSUMPTION)
Level
German hardness
[dH]
1
0-5
2
6-11
3
12-17
4
18-22
5
23-31
6
32-50
RINSE AID CONSUMPTION SETTINGS
Level
Number of rinse aid doses that is dispensed
1
Rinse aid not dispensed
2
1 dose
3
2 doses
44
•
English
French hardness
British hardness [dE]
[dF]
0-9
0-6
10-20
7-14
21-30
15-21
31-40
22-28
41-55
29-39
56-90
40-63
Display indicator
r1
r2
r3
(Figure 17)
(Figure 18)
(Figure 19)
(Figure 20)
(Figure 21)
(Figure 22)
Display indicator
L1
L2
L3
L4
L5
L6
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
