Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
2. INTRODUCTION
2.1 GENERAL DESCRIPTION
WELDKAR MULTIMIG 2140
Three different types of welding in just one single
lightweight inverter makes the Weldkar WK MultiMIG
2140 unique. This 230 volt inverter can be used for
MIG/MAG, TIG DC and MMA (electrode) welding.
This portable all-rounder, which only weighs 15 kg,
works on 230 volts and has a maximum welding output
of 200 amps with a high duty cycle, making it the perfect
partner for the most common welding jobs.
In MIG/MAG mode, welding steel and CuSi3 up to 5
mm plate thickness is no problem at all. The built-in
2-roll wire feed transports the welding wire trouble-free
over a length of 4 meters.
This 3 in 1 machine is of course also equipped with
extra functions such as burnback, 2/4 stroke switching,
gas pre-flow and post-flow time, gas tester and central
connector for the MIG welding torch.
TIG welding work can be done using scratch start with
the 4-meter TIG welding torch included. In combination
2.2 TECHNICAL SPECIFICATIONS
Model
Mains voltage 1-phase
Frequency
Fuse rating
Current adjustment range
Duty Cycle (40°C - 10 min.)
Open circuit voltage
Wire sizes that can be used
Electrodes that can be used
Max. wire spool size
Wire feeder
Protection Class
Isolation Class
Weight
Dimensions (LxWxH)
with the welding accessories set included, welding can
also be done with shielded electrodes up to 3.25 mm.
The machine is provided with CE and EMC and suitable
for generator use.
The weld inverter is supplied as standard with a:
-
WK MultiMIG 2140 Inverter Power source
-
Electrode holder with 4-meter welding cable and
DIN Plug
-
Earth clamp with 4-meter earth cable and DIN Plug
-
TIG Welding Torch WP 17 - 4 meter
-
MIG Welding Torch WK 250 - 3 meter
-
Power cable 5 meter, 3 x 2.5 mm²
-
Gas hose
-
2-roller wire feed unit in aluminium
-
Operating manual
The instructions below provide detailed information for
the correct and safe use of the machine and instructions
for obtaining the greatest efficiency and quality from
your power source.
IT MUST NOT BE USED TO DEFROST PIPES.
MIG-WELDING
TIG-WELDING
WK MultiMIG 2140
230 Volt / ± 10%
50 / 60 Hz
16 A (slow blow)
40 – 200 A
10 – 200 A
200 A – 40%
200 A – 40%
165 A – 60%
165 A – 60%
130 A – 100%
130 A – 100%
63 Volt
FE: 0,6/0,8/1,0
AL: 1,0
INOX: 0,8/1,0
CuSi3: 0,8
Cored: 0,9
Ø 200 mm / 5 kg
2-rols
IP 23
H
15 kg
500 x 210 x 380 mm
MMA-WELDING
10 – 200 A
200 A – 40%
165 A – 60%
130 A – 100%
Ø 2.00 – 2.50 – 3.25 mm
19
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
