Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
INSTALLATION AND CONNECTION
Connecting the water hose to the refrigerator
1. Insert the other end of the water hose that is connected to the water filter outlet as far as it
will go into the connector.
2. Insert the water hose from the refrigerator as far as it will go into the other end of the
connector.
3. Fit a retaining clip on each end.
4. Open the tap and check for leaks. If leaks occur, repeat steps 1, 2 and 3. If the leak remains,
we recommend that you contact the service centre.
Connecting the appliance
•
Connect mains lead of the appliance to the mains supply. The socket must be earthed. The
nominal voltage and frequency required for the appliance are shown on the appliance's type
plate/label with basic information.
•
The appliance must be connected to the mains and earthed in accordance with the
prevailing standards and regulations. The appliance can withstand small variations in the
mains voltage to a maximum of plus or minus 6%.
When you are not going to use the appliance for a longer period, switch it off by
disconnecting it from the mains. Empty, defrost and clean the appliance, and leave the
door(s) ajar.
Freeze burn hazard
To avoid freeze burn, never put frozen food in your mouth and do not touch frozen food.
EN 17
Advertenties
Hoofdstukken
Inhoudsopgave
