Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
IN S TA LLA TION M A N U A L
9.4 Adjusting the door handle
During installation or maintenance, check whether the door closes. If desired, it is possible to adjust the door. This
is the case, if the seal is insufficient (cracks).
Ø
Check the sealing of the door by placing a sheet of paper between the door and the fire. After closing the door, it
should not be possible to pull out the sheet of paper easily. Check the door all around.
Take the following actions, if the door does not seal properly:
Ø
Adjust the door handle.
Proceed as follows when adjusting the door handle:
Ø
Loosen the 2 hexagonal pin nuts around which the handle of the door falls by a few turns (see appendix 2, fig. 9).
This pin ensures that the door is tightly clamped.
Ø
Adjust the pin.
Ø
Tighten the 2 hexagonal nuts again.
Ø
Test the sealing of the door (see the start of this section).
Ø
Repeat this process if the result is not satisfactory.
39
Advertenties
Hoofdstukken
Inhoudsopgave
