Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
I NS T AL L AT I ON M A N U A L
9.3 Interior lining
9.3.1 Vermiculite
The fire's vermiculite plates are located on the bottom and against the rear and side walls of the appliance.
In the following situations the vermiculite plates must be taken out:
•
When disassembling the air slide valve (see section 9.2.1).
•
When replacing the vermiculite plates.
The bottom plates are removed first and the rear plates are removed last.
Make sure that the vermiculite plates are placed back in their original position! The back plate, for instance, must
!Caution
be placed with the small, not countersunk, holes towards the front.
9.3.2 Flame baffle plate
On delivery the flame baffle plate (see Appendix 2, fig. 7) is located in the top section of the appliance.
In case of maintenance to the appliance, the flame baffle plate has to be removed.
To do this proceed as follows:
Ø
Take hold of the flame baffle plate and push the right side upwards.
Ø
Slide the flame baffle plate over the ridge to the right.
Ø
Lower the left side of the flame baffle plate and remove the flame baffle plate.
Placing the flame baffle plate takes place in reverse order.
The stainless steel profile must be placed at the front with the screw heads on top (see Appendix 2, fig. 7).
!Caution
UK
Advertenties
Hoofdstukken
Inhoudsopgave
