Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
EN
6. Additional bedcovers can be placed above
the electric blanket (8) to retain more warmth if
needed.
7. Unplug the appliance from the wall socket
when it is no longer in use.
When the appliance is used as the electric
underblanket (fig. B2) :
1. Use this product as an underblanket only when
the bed size exceeds 140 (W) x 200 (L) cm.
2. Place the blanket (8) flat on the mattress, make
sure it is without any folds or ruck-up. The head
area does not need to be heated.
3. Always use the side with 4D DWF circular holes
towards your body.
4. Join the detachable plug-in connector (6) to the
connection box (7).
5. Cover the blanket and the mattress with
the bed sheet, make sure again the blanket
is completely flat and the controller (2) is not
covered by the sheet, pillow or any objects.
6. Plug the mains cable (1) to the socket.
7. The blanket (8) should be covered by a duvet,
for example, otherwise there will be a high loss
of heat and the blanket cannot warm up
properly.
8. Unplug the appliance from the wall socket
when it is no longer in use.
14
Advertenties
Inhoudsopgave
