Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
When you first connect the unit to the mains socket, display will show the "00:00:00". If you can receive a DAB+ signal in your
location, the unit will synchronize to the current local time. After approximately one minute, it will switch to STAND BY mode.
•
Press ON/STANDBY on the unit or on the remote control to switch the unit to ON mode.
•
Press ON/STANDBY on the unit or on the remote control to switch the unit back to STANDBY mode.
•
Disconnect the mains plug from the mains socket if you want to switch the unit off completely.
Note:
If the digital radio is not used for 20 minutes, it will automatically enter into standby mode.
You can set the time manually if the radio signal is not strong enough to set automatically.
Press the MENU button on the remote or press and hold the MENU/INFO button on the micro system.
When the FULL SCAN option appears (DAB mode) or SCAN SETTING (FM mode) press either < TUNE or TUNE > buttons on the
remote or [
] or [
] buttons on the micro system and locate SYSTEM, press the ENTER button on the remote or UNPAIR/
ENTER on the micro system.
Use the < TUNE or TUNE > buttons on the remote or [
ENTER button on the remote or UNPAIR/ENTER on the micro system.
From this menu there are multiple options - SET TIME/DATE, AUTO UPDATE, SET 12/24 HOUR & SET DATE FORMAT Select one
and press the ENTER button on the remote or UNPAIR/ENTER on the micro system.
SET TIME
Use the < TUNE/ TUNE > buttons on the remote or [
button on the remote or UNPAIR/ENTER on the micro system to skip to the next setting.
Use the same buttons from step 1 (above) to set the time and then the date.
Press the ENTER button on the remote or UNPAIR/ENTER on the micro system when complete to store the settings.
AUTO UPDATE
This setting specifies the automatic clock setting.
Use the < TUNE/ TUNE > buttons on the remote or [
from any mode possible), DAB (sets the clock only from DAB mode), FM (sets the clock only from FM mode), NONE (does not
set the clock automatically and uses the manual time as described above)
Press the ENTER button on the remote or UNPAIR/ENTER on the micro system to store the setting.
SET 12/24 HOUR
Select how the clock is displayed.
Use the < TUNE/ TUNE > buttons on the remote or [
Press the ENTER button on the remote or UNPAIR/ENTER on the micro system to store the setting.
SET DATE FORMAT
Select how the date is displayed.
Use the < TUNE/ TUNE > buttons on the remote or [
Month & Year), MM-DD-YYYY (Month, Day & Year)
Press the ENTER button on the remote or UNPAIR/ENTER on the micro system to store the setting.
Follow the below instructions to switch between CD, DAB, FM, AUX IN, USB & BT input modes.
Press the SOURCE button on the micro system repeatedly to cycle between CD, FM, AUDIO-IN & BT input modes.
Press the relevant button on the remote to select the input mode you require. Press the FM/DAB button to switch to DAB
mode. Press once more to switch to FM mode.
] or [
] buttons on the micro system to find TIME and press the
] or [
] buttons on the micro system to adjust the digits and the ENTER
] or [
] buttons on the micro system to select from- ANY (sets the clock
] or [
] buttons on the micro system to select from 12 or 24 hours.
] or [
] buttons on the micro system to select from- DD-MM-YYYY (Day,
9
Advertenties
Inhoudsopgave
