Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
To scan for radio stations press and hold either of the < TUNE or TUNE > buttons on the remote or [
micro system for two seconds to scan down or up the frequency band. When a station is found the scan will stop and the
station will begin to play.
To fine tune the frequency press either of the < TUNE or TUNE > buttons on the remote or [
system (do not press & hold), to jump 0.05 MHz up or down.
Alternatively press the SCAN button on the remote to begin scanning up the frequency range. When a station is located
playback will begin automatically.
FM scan modes
Scan modes determine how strong an FM signa! needs to be accepted as a potential radio station when scanning.
Press the MENU button on the remote or press and hold the MENU/INFO button on the micro system
When the SCAN SETTING option appears press and hold the ENTER button on the remote or UNPAIR/ENTER on the micro
system.
Use the < TUNE or TUNE > buttons on the remote or [
STATIONS (Strong local stations only) or ALL STATIONS (All available stations)
Press ENTER button on the remote or UNPAIR/ENTER on the micro system to save.
Storing station presets
Follow the below steps to store a tuned station to one of 10 preset locations to allow quick access.
Tune to the station you wish to store as a preset and follow the below instructions.
Press and hold the MEMORY button on the remote control. The display will show
SAVE TO P1, where P1 is the selected preset location.
Use the PRESET UP or PRESET DOWN buttons on the remote to select the preset number from 1-10 you wish to use. Then
press the ENTER button on the remote or UNPAIR/ENTER on the micro system to store.
When stored the display will show PRESET X STORED.
Once a station is saved to a preset you will no longer see # EMPTY when pressing the MEMORY button, instead the station
name or frequency will appear.
Recalling station presets
To recall a stored preset station press the relevant numeric button on the remote control.
For example to recall the station stored on preset 3 press the numeric button 3. And to recall a station stored on location 10,
press the 10+ button and then the O button.
Alternatively, press the MEMORY button, use PRESET UP / PRESET DOWN on the remote to select the stored preset station,
then press the enter button to start.
Switch the input mode to CD & follow the instructions below to load a CD/ MP3CD.
1.
Press the OPEN/CLOSE button on the micro system or remote, when the disc compartment cover slides fully to
left; insert a disc into the spindle (label facing outwards)
2.
Press the OPEN/CLOSE button once more to close the drawer.
3.
When the door is closed READING will appear on the display as the unit detects compatible audio tracks .
Playing a CD/ MP3CD
1.
After loading a CD in the steps above, the disc will be read and playback will begin automatically from track 01
2.
To stop playback press the■ STOP button on the micro system or on the remote.
To pause playback press the ►II PLAY/PAUSE button micro system or on the remote during playback. To resume
3.
playback press the ►II PLAY/PAUSE button once more.
Skipping tracks on a CD/ MP3CD
1.
Skip to the next track on a disc by pressing [
2.
Skip to the previous track by pressing [
Fast searching tracks CD/ MP3CD
1.
To fast forward a track during playback press and hold FORWARD on the micro system or remote control.
2.
To fast rewind a track during playback press and hold BACKWARD on the micro system or remote control.
Programmed playback CD
1.
Press the STOP button to stop playback (if required).
2.
Press the MEMORY button on the remote control. You will see the below options appear on the display.
3.
Use the [
] or [
] button on the micro system or the remote control.
] buttons to select the track
] or [
] buttons on the micro system to select between STRONG
] button on the micro system or the remote control.
11
] or [
] buttons on the
] or [
] buttons on the micro
the
Advertenties
Inhoudsopgave
