Advertenties
Beschikbare talen
Beschikbare talen
Manual for replacing the rubber edges
5. Rub the plate with sandpaper.
6. Clean it with nature vinegar or a degreaser (or dry cleaning naphtha).
7. Cover it with a film of bisontix contact glue (wait until its dry).
8. Put down the edges on the plate.
9. Start with the outer edge. Cut off one side straight.
10. Start pasting 1 mm from the edge (don't be to economical with the glue).
11. Every time process with a piece from approximately 20 cm.
12. Remove the overflowing glue on the inside with a screwdriver.
13. Don't glue at the end for 7 cm.
14. Put the unpasted edge across the edge that is already pasted.
.
Advertenties
