Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
•
NEVER use the cord in the proximity of heat sources, such as ovens, stoves or heating.
•
Repairs can only be done by a recognized repair shop.
•
Persons who haven't read this instruction manual cannot use this appliance.
•
NEVER push food with your hands into the filling shaft. Always use the pusher. The use of other objects like a spoon or
a spatula can damage the meat grinder.
•
If you are unable to resolve a possible blockage with the "Reverse" function (REV), please disconnect the device first
and wait until the motor stops running. Then disassemble the different parts.
•
Remove bones, cartilage and tendons of the meat before grinding it.
•
Cut the ingredients in small pieces so that they fit easily in the filling shaft.
•
Don't overload the appliance or don't use too much strength when you push the food down with the pusher.
•
Always make sure to assemble the appliance correctly. For your own safety the appliance will not work if not
assembled properly.
•
Always place the appliance on a stable surface, like a kitchen table so that the appliance cannot shift or fall.
•
Do not use aggressive cleaning products.
•
Never let the cord hang over the side of the table.
2. TECHNICAL INFORMATION
•
You will find the technical information on the rating label at the bottom of the appliance.
•
Use the appliance for a maximum time of 10 minutes at the time.
•
The mandatory time between 2 sessions is 30 minutes.
3. BEFORE THE FIRST USE
•
Remove all packaging and stickers.
•
Keep packaging away from children.
•
First check your appliance and the electrical cord for possible damages. If it is damaged, do NOT use the appliance but
bring it back to your sales point.
•
Before the first use we recommend to clean all components thoroughly (see 'Maintenance and Cleaning').
•
All parts should be dry!
•
Ensure that the voltage marked on the appliance is the same as your main voltage.
4. ASSEMBLING OF THE MEAT GRINDER
•
Fix the grinding chamber (Q) on the opening of the motor unit (D). Notice the grooves in order to mount it properly.
•
Put the worm screw (P) in the grinding chamber with the gear wheel on the inside.
•
Put the knife (O) with the sharp edge facing out. Make sure to assemble the knife correctly, if not it could damage the
appliance.
•
Apply the desired grinding plate.
•
Tighten the ring nut (L) to fasten everything.
•
Completely unroll the electrical cord and put the appliance on a stable surface. Put the plug in the socket. Always
check the mains voltage.
The food can be ground insufficiently or the knife can become blunt if the appliance is not assembled correctly.
16
Advertenties
Inhoudsopgave
