Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Note: You can adjust the temperature controller refer to the following "OK" sticker.
THE COLDEST PART OF THE REFRIGERATOR
INSTALLING THE TEMPERATURE INDICATOR
To help you adjust your refrigerator correctly, it is equipp ed with a temperature indicator that you can use to control
the average temperature in the coldest area.
TEMPERATURE INDICATOR: THE COLDEST PART OF YOUR REFRIGERATOR
CHECKING THE TEMPERATURE IN THE COLDEST AREA
• Using the temperature indicator, you should regularly check that the temperature is
correct in the coldest part of your refrigerator. The temperature inside your refrigerator depends on
a number of factors, such as the outside room temperature, how full your refrigerator is, and how
often you open the door. Take these factors into consideration when adjusting your appliance.
When the indicator shows "OK", it means your thermostat is set properly and the temperature
in coldest part is below +4℃.
If the indicator is white it means the temperature is high, so you should increase the thermostat
and wait for 12 hours before checking the indicator again.
After loading the refrigerator or opening the door, the indicator may turn white for a few seconds.
The symbol indicates the location of the coldest part of your
refrigerator. This area is in between the vegetable drawer at
the bottom and the symbol at the top, or the shelf at the same height.
In order to maintain the temperature in this area, make sure not to
change the position of this shelf.
OK
Correct setting
Temperature too high
– adjust the thermostat
EN-17
Advertenties
Inhoudsopgave
