Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
4. FUNCTIONS OF THE WEATHER STATION
Keep in mind that only after approximately 12 hours after installing and setting the units, the various
sensor will have had enough time to adjust and will then start showing reliable measurement
results in the display.
4.1 Temperature and humidity:
The left part of the display shows the outdoor temperature and humidity. The indoor unit obtains this
information from the outdoor unit.
The right part of the display shows the indoor temperature and humidity. The indoor unit uses its built-in
sensors for these values.
Following the temperature and humidity, an indicator shows whether these values decrease (
unchanged (
In addition, the measured maximum and minimum values are shown. At Hi the measured maximum tem-
perature and humidity are indicated and at Lo the minimum values are shown.
These MAX and MIN values are automatically reset each night at 12am.
4.2 Moon phase and air pressure
In the middle of the lower part of the display the moon phase and air pressure are indicated. The moon
phase is linked to the date you've set.
The air pressure is measured by one of the built-in sensors of the indoor unit.
Repeatedly press the + button at the rear of the indoor unit to show the air pressure of the last 12 hours.
4.3 Weather forecast
The middle of the display shows the weather forecast using various animations:
TREND
••
sunny
Combined with the outdoor unit and how fast the air pressure changes, the following weather forecasts
are possible:
TREND
storm
Additionally, the unit shows whether the air pressure decreases (
increases (
TREND
) or increase (
)
TREND
partly cloudy
TREND
light snowfall
).
TREND
very cloudy
TREND
heavy snowfall
TREND
34
TREND
rainy
), remains the same (
), remain
) or
TREND
Advertenties
Hoofdstukken
Inhoudsopgave
