Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
3.3 Setup
DCF function
The WS-1560 is outfitted with a DCF function, with which the time is automatically tracked and updated
through signals from the closest DCF transmitter. After connecting the power supply, the WS-1560 will
first make contact with the outdoor unit. As soon as the indoor and outdoor units are synchronized, the
WS-1560 will automatically search for DCF signal. Starting the DCF search sequence is completely auto-
mated, no action is required. While searching for DCF signal, the base unit's backlight is turned off. Allow
the WS-1560 10 - 20 minutes to find the DCF signal before setting the time manually. The WS-1560 finds
the DCF signal faster when placed near a window. If the DCF signal is not found, move the WS-1560 to
another location and try again.
Manual installation
You may set the time, date and other functions as follows:
1. Press and hold the MODE button for 2 seconds, "12Hr" or "24Hr" starts flashing in the display
2. Use the + and - buttons to adjust the setting and press the MODE button to continue to the next set-
ting;
3. One after the other, set the following functions:
•
Time display in 12 hours or 24 hours format
For example, quarter past 3 in the afternoon: in 12h format: 3:15 pm and in 24h format:
•
Temperature display in degrees Celsius or degrees Fahrenheit
•
Air pressure display in mmHg (mm mercury pressure), inHg (inch mercury pressure) or in mb / hPa
(millibars / hecto-Pascal)
In the Benelux the hecto-Pascal notation is used; before the air pressure was sometimes also
•
Time zone (set to '00' for use in the Benelux.
•
The language for displaying the day
DUT = Dutch, ITA = Italian, SPA = Spanish, FRE = French, GER = German, ENG = English,
DAN = Danish
•
The hours
•
The minutes
•
The day notation (day / month or month / day)
•
The year
•
The month
•
The date
4. After pressing the MODE button for the last time, your settings will be saved and the settings mode is
ended.
Daylight saving time: When winter time is changed to summer time, the clock automatically
adjusts itself and the abbreviation "DST" will appear behind the time display. This abbreviation
stands for "Daylight Saving Time" (= summer time)
If "DST" is shown when summer time changes to winter time, then "DST" disappears and the clock will
again automatically adjust itself.
However, if you've set the time manually during daylight saving time, then "DST" won't appear and the
clock does NOT automatically switch to winter time. You'll have to manually adjust it.
15:15h
expressed in bar; 1 mbar equals 1 hPa.
33
Advertenties
Hoofdstukken
Inhoudsopgave
