Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Fault
Cool-fresh compartment is
too warm or cold.
Noise
Fault
Appliance has a humming
sound.
The appliance bubbles,
buzzes or gargles.
The appliance clicks.
The appliance makes
noises.
Cause
Standard setting is too high
or too low, e.g. frost in cool-
fresh compartment.
Cause
Not a fault. A motor is run-
ning, e.g. refrigerating unit,
fan.
Not a fault. Refrigerant flows
through the pipes.
Not a fault. Motor, switches
or solenoid valves are
switching on or off.
The appliance is not level.
Fittings wobble or stick.
Bottles or containers are
touching.
Super freezing is switched
on.
Troubleshooting en
troubleshooting
Note: The standard setting of the cool-
fresh compartment is preset at 0. Set-
ting 0 corresponds to a temperature of
around 0 °C. You can set the temperat-
ure in the cool-fresh compartment to
3 settings warmer or colder.
A change in the standard setting will
affect the temperature in the refriger-
ator compartment and the freezer
compartment.
Press
until the temperature
1.
display (refrigerator compartment)
flashes.
To change the setting, press / .
2.
– Setting –3 corresponds to the
coldest setting.
– Setting +3 corresponds to the
warmest setting.
a The selected setting is saved after
one minute.
troubleshooting
No action required.
No action required.
No action required.
Align the appliance using a spirit
▶
level. If required, place something
underneath it.
Check the removable fittings and, if
▶
required, replace these.
Move the bottles or containers
▶
away from each other.
No action required.
35
Advertenties
Hoofdstukken
Inhoudsopgave
