Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
R
➢ At least every 3 - 6 months according to the frequency of use of the extractor
hood.
➢ Type name of the
6.3 Replacing of the illuminant
WARNING! The LED-illuminant must be replaced by a competent
person only. Do not carry out the replacement of the illuminant yourself. If
the LED-illuminant is damaged, please contact a qualified professional
(electrical engineer): not covered by the guarantee.
WARNING! Switch off the appliance and disconnect it from the mains
before you replace the illuminant (use the relevant fuse in your household
fuse box).
NOTICE! Do not touch the illuminant with your hands. The sweat on your
fingers will reduce the operating time of your new illuminant. Use a thin
cloth or a thin glove.
I
NSTRUCTIONS FOR THE QUALIFIED PROFESSIONAL
1. The LED - illuminant should have cooled down before you remove it.
2. If you want to replace the LED - illuminant, you must remove the aluminium
grease filter first. Press the lock and pull the aluminium grease filter downwards
(s. fig. below).
3. Push out the used LED - illuminant carefully.
EPLACEMENT INTERVAL FOR CARBON FILTERS
You can order the
www.pkm-online.de
CARBON FILTERS
(
ELECTRICAL ENGINEER
CARBON FILTERS
: See chapter T
)
~
~
61
at
ECHNICAL DATA
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
