Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
1. The appliance must be transported and installed by at least two
persons.
2. Unpack the parts of the chimney very carefully; otherwise, you will
damage the chimney.
3. Remove the complete packaging materials before initial operation.
The appliance may be equipped with a transportation lock. Remove
the transportation lock completely. When removing be very careful.
Do not use any aggressive detergents to remove residues of the
transportation lock.
4. Clean and maintain the appliance regularly to enable its proper
operation and optimal performance.
5. Take the enclosed parts from the packaging and its polystyrene-
components.
6. Check that the power cord and the appliance are not damaged before
electrical connection.
7. The rating plate must not be removed or made illegible, otherwise
all terms of the warranty become invalid!
The manufacturer and distributor are not responsible for any damage or
injury in the event of failure to comply with these instructions.
2. Installation
2.1 Important installation instructions: extraction mode
WARNING! Do not lead the exhaust air into a chimney which is used
for extracting exhaust air of appliances operated by gas or other
combustibles.
1. For extracting the exhaust air always observe the current legal regulations.
2. The diameter of the exhaust hose must meet the diameter of the connecting ring.
3. If your appliance is equipped with a carbon filter, remove the carbon filter before
you operate the appliance in the extraction mode. The carbon filter should be
used in the recirculating mode only.
4. The exhaust duct should be as short and straight as possible. The diameter of the
exhaust hose should be at least 120/150 mm (look at chapter T
NOTICE!
SAVE THESE INSTRUCTIONS.
~
42
~
D
).
ECHNICAL
ATA
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
