Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
MAINTENANCE
Cleaning
GB 14
Attention!
Before performing any maintenance operation, isolate the hood from
the electrical supply by switching off at the connector and removing the
connector fuse. Or if the appliance has been connected through a plug
and socket, then the plug must be removed from the socket.
The cooker hood should be cleaned regularly (at least with the same
frequency with which you carry out maintenance of the fat filters)
internally and externally. Do not use abrasive products. Do not use
alcohol!
Attention!
Failure to carry out the basic cleaning recommendations of the cooker
hood and replacement of the filters may cause fire risks. Therefore, we
recommend oserving these instructions. The manufacturer declines all
responsibility for any damage to the motor or any fire damage linked
to inappropriate maintenance or failure to observe the above safety
recommendations.
Cooker hood
Clean the cooker hood with soapy water and a soft cloth. Then wipe
with clean water to rinse. Do not use aggressive cleaning agents such
as soda. The cooker hood paintwork will stay looking nice if you wax it
occasionally.
Stainless steel cooker hoods
Do not use any sort of scourer. Treat with a stainless steel care product
and polish with the structure of the stainless steel.
Metal grease filters
These must be cleaned once a month (or when the filter saturation
indication system – if envisaged on the model in possession – indicates
this necessity) using non aggressive detergents, either by hand or in the
dishwasher, which must be set to a low temperature and a short cycle.
The openings must be placed downwards to let the water run out of the
filters. The cleaning agents will make the aluminium filter turn dull, this
is normal.
Advertenties
Hoofdstukken
Inhoudsopgave
