Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
4. USE OF PRODUCT
4.1 Hob controls
Ceramic Heater
The ceramic heater is controlled by a 6
position knob.
The ceramic heater is operated by
turning the control knob to the required
setting. Near each control knob is a
symbol which indicates the heater that is
controlled by that knob. The on/off light
on the control panel will show if any of
the ceramic heaters are in use.
Knob Position
0
1
2-3
4-5-6
Important: The knob rotation
direction may differ according to the
product specification.
Dual and Oval Heaters (if available)
Dual and oval heaters have two heating
zones. To activate the outer zone of a dual/
oval heater, turn the knob to
Both outer zones will switch on.
To deactivate the outer zone of a dual/oval
heater, turn the knob to the 'Off' position.
Both outer zones will switch off.
4.2 Oven Controls
Oven function control knob
Turn the knob to the corresponding symbol
of the desired cooking function. For the
details of different functions see ´Oven
Functions`.
Oven thermostat knob
After selecting a cooking function, turn this
knob to set the desired temperature. The
oven thermostat light will illuminate
whenever the thermostat is in operation
Function
Off position
Keep warm position
Heating position at low heat
Cooking, roasting and boiling
position
position.
to heat up the oven or maintain the
temperature.Oven Functions
* The functions of your oven may be
different due to the model of your product.
on a shelf in the third slot from the bottom.
It is recommended that you place an oven
tray under the defrosting food to catch the
water accumulated due to melting ice. This
function will not cook or bake your food, it
will only help to defrost it.
evenly disperses the heat in the oven so all
food on all racks will cook evenly. It is
recommended that you preheat the oven for
about 10 minutes.
static cooking function emits heat, ensuring
even cooking of food. This is ideal for
making pastries, cakes, baked pasta,
lasagne and pizza. Preheating the oven for
10 minutes is recommended and it is best
to use only one shelf at a time in this
function.
This function is good for baking pastry.
Cooking is carried out by the lower and
upper heating elements within the oven and
by the fan, which provides air circulation,
giving a slightly grilled effect to the food. It
is recommended that you preheat the oven
for about 10 minutes.
EN - 15
Defrost Function: The
oven's warning lights
will switch on and the
fan will start to operate.
To use the defrost
function, place your
frozen food in the oven
Turbo Function: The
oven's thermostat and
warning lights will
switch on, and the ring
heating element and
fan will start operating.
The turbo function
Static Cooking
Function: The oven's
thermostat and
warning lights will
switch on, and the
lower and upper
heating elements will
start operating. The
Fan Function: The
oven's thermostat and
warning lights will
switch on, and the
upper and lower
heating elements and
fan will start operating.
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
